| Material of Consturction |
As a standard, wetted parts are offered in
(PP) Polypropylene, UHMW HDPE for clear fluids upto 80 Degree Centigrade Temp. Glass Filled
Polypropylene (GFP) having good resistance
to erosion, is used for fluids having
suspended particles and slurry service as
well as for temperatures upto 120 Degree Centigrade. For
fluids where PP, UHMW HDPE and GFP are not compatible, PTFE wetted parts are
recommended.special seals with suitable
faces are available with proper environment
control arrangements.
|
| Impeller |
The Impeller has a radial semi-open design, with large contoured flow passages. It is a
one piece robust construction, statically
balanced and lightweight. It is manufactured
by an injection moulding process and is
provided with back vanes to minimise axial thrust for enhanced bearing life. |
| |
| |
| Sealing |
| O’ Rings and Gaskets Sealing are provided in the joints to ensure better sealing even at high pressure. |
| |
| |
| Sleeve |
The Shaft Sleeve is made of Ceramic (99.5%
AI-oxide), Hastelloy-B, Alloy-20, Monel,
Titanium, etc. to suit various applications. |
| |
| |
| Priming Chambers |
| This is specially used for negative suction. It
is very effective in handling liquids with
slurry or particles, as it does not get clogged
as easily as the foot valve. |
| |
| |
Trolley
|
| A specially designed vibration free trolley
keeps the pump mobile, whenever required.
Further the trolley can also be provided with
FRV coating on those parts exposed to
chemical drip. |
| |
| |
| |
| Applications and Industries Served |
| |
|
 |
Chemical processing |
|
Effluent treatment |
|
Fumes scrubbing |
|
Acid pickling |
|
Recirculation process |
|
Photographic processing |
|
Drugs and pharmaceuticals |
|
Food processing |
|
Perfumeries |
|
Detergents and caustics |
|
Breweries |
|
Petrochemicals |
|
Dyes and pigments |
|
Tanneries |
|
Paper and pulp industries |
